[Blackadder.]

Running VCS Cheatdevice on Firmware 3.03 OE-C

This is a tutorial to help people run Cheatdevice on Firmware 3.03 OE-C!

Step 1 Plug your PSP into your PC via USB cable. Then Go into the XMB (Home Menu) and navigate to "USB Connection"

Step 2 Activate USB Mode, if everything is going right, it should look like this

Step 3 Browse to your PSP directory on your PC. It should look something like this Step 4 Create a folder called "SEplugins" Step 5 Open up the newly created folder and put your .prx file in there (For this tutorial we are using vcscheatdevice.prx) It should look a little like the picture above[/centre] Step 6 [center[In the same folder, create a .txt document and call it "game.txt" Step 7 Open up your game.txt and put in this line QUOTE (Put into game.txt) ms0:SEplugins/vcscheatdevice.prx Save changes and close. Disconnect your PSP from your PC

Step 8 •Turn off your PSP completley by holding the power switch up until it goes off. Then turn your PSP on again whilst holding the R trigger. Your PSP should enter recovery mode Step 9 •Navigate to "Plugins" and press X. You should see two lines of text. The first should say "Back" and the second should say "vcscheatdevice.prx [GAME] (Disabled)" navigate to vcscheatdevice.prx and press X. it should now say "vcscheatdevice.prx [GAME] (Enabled)" Note: If you are having problems regarding the vcscheatdevice.prx not showing up, try naming the .txt document game instead of game.txt Step 10 •Press back and navigate to "Advanced" press X and you should see 3 options. Navigate to "Advanced Configuration" and press X. You should see three lines of four lines of text. Ignore the last two and navigate to the one that says "Plain Modules in UMD/ISO (Currently: Disabled)" Press X and make sure it says "Plain Modules in UMD/ISO (Currently: Enabled)" Step 11 •Press "Back" until you get to the Recovery Main menu. Navigate to "Exit" and press X. If you don't have a UMD in your PSP please proceed to Step 13 Step 12 •If you have a UMD in your PSP, eject the UMD and wait for your PSP to reach the XMB (Home Menu) Step 13 Your PSP should reach the XMB (Home Menu) Insert VCS and fire it up. Congratulations! You are running Cheatdevice on Firmware 3.03 OE-C!

Enjoy!


Edited By Raindancer

This post has been edited by blackadder18 on Friday, Feb 2 2007, 05:21

[Brutuz]

I can confirm this works, and it only took me 5 Minutes, not including Downloading CD, and it fully works, Nothing Missing in CD!

Good Work B18!

I think the server doesn't like the amount of Tables in that

[Blackadder.]

It seemed to be doing it since the first table, so I have no idea why it's doing this

[Futurama_Freak1]

Nice tutorial i'mma bookmark it so when i downgrade then upgrade to 3.03 OE-C i will be able to use cheat device
oh and Charge your psp

[Brutuz]

QUOTE (blackadder18 @ Jan 31 2007, 20:37)

It seemed to be doing it since the first table, so I have no idea why it's doing this

I think the server doesn't like that many tables, You might have to split post it.

[Blackadder.]

I did the first table and previewed it, and it was like that, without any other tables

[Brutuz]

Hey Raindancer Fixed it, Now it looks Good

[Blackadder.]

Thankyou Raindancer! If anyone notices any techinical error with this guide, please inform me ASP

[zero134]

Well i'm always having problems.
I did everything that you posted and still when i go into the plugins, it only says back. I can't find the problem

[Blackadder.]

Did you create the game.txt and put in that line? That's what was causing me problems when I first tried

[zero134]

yeah i did that. Does it have to go on a notepad because i only have text and wordpad Document on my computer and i tried both of them and still didn't work

[Blackadder.]

As long as the file is called game.txt it should work. I'm not really sure what the problem is

[MckMan31]

if your using custom 3.03 oec how did you take pictures cause i have sv capture but it doesnt like to work on the xmb. if you have the prx for taking pictures can you send it to mckenzie_wells@msn.com

[zero134]

ok i got it working. someone sent me a pm with the folder and everything. I have it

[makaveli 7]

this aint working for me either i did evrything i enebled the cheatdevice and the other thing but when i boot the game no cheatdevice comes up nevermind i got it 2 work what was wrong was if i put game.txt then the cheatdevice wouldent show up for me 2 eneble but if i just put game it showed up

This post has been edited by makaveli 7 on Thursday, Feb 1 2007, 01:39

[Blackadder.]

Mckman: I lost my USB cable

zero134: Cool!

makaveli: Are you running windows XP? If you are you need to make sure you have changed the options to show extensions, otherwise it screws up

[makaveli 7]

QUOTE (blackadder18 @ Feb 1 2007, 03:44)

makaveli: Are you running windows XP? If you are you need to make sure you have changed the options to show extensions, otherwise it screws up

wait i already are you sayin its gonna only work for a lil then mess up or wat im confused

[Blackadder.]

No, I'm just saying that Windows XP tried to be user friendly and hide file extensions, so if you were to create a txt document called game.txt, since the file extension is hidden, it's actually game.txt.txt

Don't worry, as long as Cheatdevice is working then everything is good

[makaveli 7]

QUOTE (blackadder18 @ Feb 1 2007, 05:25)

No, I'm just saying that Windows XP tried to be user friendly and hide file extensions, so if you were to create a txt document called game.txt, since the file extension is hidden, it's actually game.txt.txt Don't worry, as long as Cheatdevice is working then everything is good

alright thanks for your help

[Pat]

Nice guide Eddie. What, no credit to me for telling you to make it?

Joking, joking. Still, it's great we don't have to get the outdated product known as DevHook to run the cheatdevice now.